Sea Tech

 

 

RUS

rus

ENG

eng

 
| NEWS | ABOUT SEA TECH | SERVICES | REFERENCE LIST | PARTNERS | CONTACTS |

Ñóäîñòðîèòåëüíàÿ êîìïàíèÿ Ñè Òåõ

 

 
 
 

Motor yacht E16

Project Å16

Conceptual & detailed design

 

Hull

The hull lines are boat-like, V-shaped, sharp-bilged. The hull framing system is longitudinal, the length spacing is 1000 mm, the width spacing is 400 mm. The hull is divided into 5 compartments along the length. The outer skin is made of steel with a thickness of 5-6 mm, the thickness of the upper deck flooring is 4 mm. Superstructure - steel/AMg-1561.

Equipment:

• Vetus bow thruster;
• 2 outboard balance rudders, 2 fixed-pitch propellers;
• high-holding force bow anchor, 75 kg;
• Muir Engineering electric capstan;
• 10 Vetus single-pedestal bollards;
• ÏÑ-10M liferaft;
• teak deck and flybridge flooring;
• Opacmare sliding glass door;
• welded guard rails made of stainless steel pipes;
• 2 Volvo Penta TAMD 63L main engines, 310 hp each, 2800 rpm;
• 2 Twin Disc gearboxes;
• Whisper 1200 diesel generator, 50 Hz, 220 V, 10 kW;
• 6 batteries of 200 Ah;
• Webasto AirTop5000 autonomous heater;
• Vetus water heater 31 l;
• Vetus pumping stations for drinking and sea water at 12.5 l/min.

Ship systems:

drinking water, sea water, waste water, fire fighting, drainage, heating, ventilation.

Tank capacity (liters):

fresh water 700, fuel 3100, bilge water 160, waste 800.

design

deck plans

characteristics

specification

model

model tests

photo from yard

final photo

 

family of yachts

Copyright © SeaTech All Rights Reserved®