|
Hull lines are hard-chined with a raked stem and flared topsides.
The hull is constructed of 9 mm and 12 mm thick Grade 1/2 WBP
plywood (transom - 24 mm), sheathed in fiberglass using polyester
resins. The longitudinal and transverse framing is made of plywood
and pine, reinforced with fiberglass. The superstructure is made of
plywood or composite material with fiberglass skins and a foam or
honeycomb core.
Equipment List (Design 1, "Houseboat" version):
• Steering: Steering wheel with electro-hydraulic control system for
outboard motors.
• Anchoring Gear: 7.5 kg HHP anchor, 12 mm polyamide anchor
rope, bow cleat.
• Mooring & Towing: 4 cleats, 2 synthetic mooring lines (14 mm
diameter, 12 m each), towing eye.
• Lifting Gear: 2 nylon lifting slings (towels).
• Saloon Equipment: Sofas with storage lockers, helm station, galley
table with sink and gas stove, wardrobe, mini-fridge, mobile tables.
• Deck Fittings: 2 exterior locking doors with glass inserts;
plexiglass windows with sliding panes, bow wiper, aluminum profile
frames; roof hatch; forepeak lockers for gas cylinder and supplies.
• Sanitation & Water: Bio-toilet (chemical toilet), gas water heater
(boiler), fresh water tank.
• Safety: Fire alarm with audible signal, fire extinguisher.
• Bilge System: Electric bilge pump, manual piston pump, 2 scuppers
with non-return valves.
• Ventilation: Exhaust fan above the gas stove.
• Power Plant: Outboard motors, two 20L fuel canisters, fuel hoses;
GESAN portable gasoline generator (50Hz, 220V, 3 kW) with manual
start; VETUS starter battery.
• Electrical: Service (220V) and emergency (12V) lighting systems,
navigation lights, searchlight, power supply via Main Switchboard (MSB).
• Communication: VHF radio (Granit-44 type).
• Fendering: Inflatable side buoyancy tubes (sponsons). |